The One Click package also provides you with our next generation Series XL Kegerator to keep your kegs nice and cold.
You’ll also get an A-type Coupler and a D-type Coupler which means you can put just about any commercial beer produced in Australia on tap no matter what the brand.
A-type Couplers are commonly required for hooking up Coopers Kegs and craft brewery produced kegs. D-type Kegs are commonly required for hooking up commercial brand beers like Carlton Draught, VB and others.
You can also source kegs of Premixed Cocktails, CC and Dry, Bundy and Cola, Ciders, Sparkling Wines and a whole host of other delicious beverages that you can serve directly from your tap system.
We’ve pre-assembled all the fiddly parts of the tap tower so all you have do is attach it to the kegerator body. They’re the easiest kegerators Australia has to offer!
Make sure your kegs are cold. Give them at least 24 hours with the kegerator set to 2C.
After your keg is cold you can pour your beverage whenever you like.
The CO2 Gas will keep your beverage fresh until you’re finished with the keg.
Commercial kegs sizes and amounts that fit in this kegerator:
1x 50L commercial keg
3x 20L commercial kegs
1x 30L commercial keg + 1x 20L commercial keg
One Click kegerator bundles fit x1 50L commercial keg or you can fit x3 20L commercial kegs in the KegMaster Series XL.
You’ll also get a counter top drip tray, stainless steel Ultratap taps and a stainless steel beer tap tower all pre-assembled so it goes together fast.
Our NEW KegMaster™ XL Beer Keg Fridges, released in May 2022, are a powerful and efficient refrigeration unit, with the larger capacity to fit four 19 Litre kegs or one 50 Litre commercial keg.
We increased the internal volume to 160 Litres AND we kept these kegerators compact so they fit practically anywhere you want to put beer, cider, wine, premixed drinks, soda water, kombucha, espresso martinis and more.
With the KegMaster™ XL kegerator, it’s your bar so you always get to choose what’s on tap!
With built in low profile rollers KegMaster™ XL kegerators are simple to move into position to start enjoying your beverages
Our Fridge Pack includes our newly improved MKX Regulators for dispensing CO2 to serve your draft system with precision and reliability.
When you get a KegMaster™ XL you get more than just a higher capacity kegerator, including:
- Built in rollers for easy moving – removeable and upgradeable to castors
- Reversible Door – orient to open how you like
- Font Fan with speed control – keeps your font cold and runs more quietly
- Internal light – handy for inspecting keg connections
- Fits standard fonts – choose how many taps you require
- Suitable for free standing installations – can also be installed under counters
- R600a Refrigerant – environmentally friendly
Specifications:
- Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
- Width: 600 mm
- Depth: 640 mm
- Internal Height: 724.9 mm
- Internal Width: 511.9 mm
- Internal Depth: 405.1 mm
- Volume: 160 L
- Weight: 43 Kg
- Power: 220-240V 50Hz
- Climate Class: T
- Refrigerant: R600a (40g)
- Insulation: Cyclopentane
- Packaged dimensions: H 88cm W 66cm D 69cm
Recommended Setback:
Our KegMaster Series XL needs good airflow to help it achieve optimum cooling power. The ideal setback, or spacing, is as per below (when facing the fridge):
- 10cm on each side
- 5-10cm at the back
- No setback required on the top, can be installed flush to a counter top
- No setback required underneath*
- No setback at the front
- Can not be enclosed into a cabinet, it must have vents
*It is recommended to have your Series XL KegMaster elevated from the floor, in case any moisture settles under it, the spacing will help dissipate it.
For more info on the Keg couplers check them out below
Keg coupler type A
Keg King coupler type D
Keg coupler type S
YOU CAN UPGRADE YOUR XL KEGERATOR'S BENCHTOP!
Swap it out for a Stainless Steel Benchtop For KegMaster XL.
Simple to replace and enjoy, Our KegMaster™ XL benchtops are available in 304 Stainless Steel for a clean, professional look that will last a lifetime.
*KegMaster XL Kegerators come with plugs for the holes on the benchtop, however Benchtop Guard Rails are an optional extra and can be purchased separately.
Setting the Calibration Factor on the Keg Master Series XL Kegerator:
If your kegerator is freezing the chill plate on the inside with a thick layer or ice, it is recommended to set the calibration at -3 and see if the situation improves.
If the KegMaster™ is not cold enough, it is recommended to set it to +2 and see it the situation improves.
- Press and hold both the “Cooler” and “Warmer” buttons for 5 seconds until the temperature display flashes SC.
- Release those buttons and press the “°F/°C” button.
- The display now shows the calibration factor, and you can change it with the “Cooler” and “Warmer” buttons.
- Once it is at the desired value press the “°F/°C” button again to save it.
WARNING! These fridges are not designed to be installed outdoors and will not withstand more than 25c of ambient temperature. Class T means that those fridges have been tested under class T category, it does not mean they are suitable for long term under tropical weather.
Check out the KegMaster XL below 🔽
